天天干在线影院,日本中文一级片,大香伊蕉国产

Application of hot water infrared radiation heating in industrial building with large space in North China

time：2023-06-05
hits：1696次
source：正弘奧能

Winter heating is very important in the cold areas of the north, especially the spacious open workshop and open office area, and in the office area or industrial workshop with large space, only the central air conditioning can not provide enough heat to ensure the indoor temperature, the radiator is only set on the surrounding wall, the heat can not be transferred to the central area.The application of hot water radiation board greatly solves this problem. The heating medium of hot water radiation board is similar to heating, both of which use hot water as heat conduction medium to provide heat, but the difference is that the hot water radiation board is suspended on the roof, which greatly saves the usable space, and the hot water radiation board uses radiation heat to penetrate the air principle.Direct transfer of heat to the personnel and objects in the heating space.Therefore, hot water radiant panels have been more and more applied to industrial buildings, workshops and office areas.


	 


	<img src="http://www.flhyjz.com/Uploads/image/20230605/20230605165705_13249.jpg" alt="" /> 


	 


	Working principle and application advantage of hot water radiant panel 


	 


	Hot water radiation plate is through the surface of the radiation plate to convert the medium heat into various wavelengths of infrared radiation and irradiation into the heating space, due to the small absorption effect of air on infrared, most of the infrared is absorbed by buildings, human bodies, equipment and other objects, energy storage, temperature rise, at the same time to heat the air around it, so that the ambient temperature rise.Therefore, the air temperature in the building is lower than the object temperature in the infrared irradiation area (generally 2-3 degrees lower), so the air stratification and convection effect is reduced, the heating system has a high utilization rate of heat energy, and the comfort is better.A large number of projects at home and abroad show that the hot water radiant panel system is better than the traditional heat sink, radiator and other convection heating and hot air heating equipment, to solve the problem of high space with convection heating effect is poor, high energy consumption, is a new heating technology for tall space buildings.


	 


	Low operating cost 


	Hot water radiant plate as the end heat dissipation equipment, no electromechanical parts, no electricity consumption, almost maintenance-free operation, save operation costs.


	 


	The payback period is short 


	Hot water radiant panel heating system is mainly manifested in high initial investment, but its energy saving after operation is obvious, the higher investment part can be compensated by energy saving in a few years.


	 


	Uniform temperature distribution 


	In the hot water radiant panel heating environment, the heat distribution is uniform, the body feeling is comfortable and soft, and there will not be the phenomenon of local temperature uneven in the wind system heating environment.


	 


	Safe and reliable 


	Hot water radiant panel heating system heating water system, low temperature and pressure, does not increase the fire rating of the building, can be used in volatile and flammable building environment, without causing the risk of fire and explosion.


	 


	In general, the hot water radiant panel can be normally hoisted on the roof, but the position relationship and connection between the radiant panel and the roof of tall space buildings, which not only involves the stability of the radiant panel and the ceiling and the heat dissipation effect of the radiant panel, but also affects the overall aesthetic effect.


	 


	<img src="http://www.flhyjz.com/Uploads/image/20230605/20230605165720_45027.jpg" alt="" /> 


	 


	ECOPAN Hot water radiant panel promoted and sold by Beijing Leadway Power&nbsp;Co., Ltd. can provide the best heating solution, which can not only make the construction operation easier, but also optimize the time, thus reducing the cost.The side is formed in the radiant plate, easy to place insulation material, the head of the pipe lining is welded perfectly, the joint cover is easy to locate, so that the installation time is shortened.With the same dimensional characteristics (pipe diameter, number and spacing, panel width), ECOPAN panels have higher thermal efficiency than other products on the market.This allows a smaller number of radiant panels to be used to meet the same thermal efficiency requirements, saving on materials and installation costs.


	 


	ECOPAN radiant panels are made of cold-formed, profiled steel plates with a 1/2 "or 3/4" diameter welded or unwelded steel pipe covering 2/3 of their surface on the shell of the steel plate.ECOPAN Hot Water Radiant panels can meet any engineering planning, functional and aesthetic requirements.

老师脱了内裤让我爽了一夜_三上悠亚av影院在线看_亚洲第一AV五码免费一区_99热热久久_一区二区久久久久久_手机黄网www8xcn

Application of hot water infrared radiation heating in industrial building with large space in North China